Skip to content

7-camera Gaussian splat photobooth with The Photo Bus

November 15, 2026

The Photo Bus, with John DePrisco and Hai Chen, used a seven-camera capture as the starting point for a reusable Gaussian splat animation. The finished preset combines a camera bounce, a spherical reveal, filaments, moving particles, and an animated logo. Once the look is approved, Camera Server can apply it to subsequent captures.

Thank you to John and Hai for this fantastic shot! Visit The Photo Bus website and follow The Photo Bus, John, and Hai on Instagram.

The finished Gaussian splat animation. Sound is available through the player controls.

This article uses The Photo Bus - splat preset 01 as the example. The screenshots show the setup at different moments in editing. The values below come from the saved project preset and screenshots; use them as a starting point and check the result against your own scene. Camera placement, subject position, scene scale, and software version can affect the result.

For an introduction, see the Gaussian splat overview and Gaussian splat FAQ.

The Photo Bus preset open in the Gaussian Splat Player, with the camera path and effect tracks visible.

1. Capture seven images

Using Camera Server, trigger the seven cameras together to capture John from seven viewpoints, then wait for all seven original images to arrive in the dataset.

2. Calibrate the cameras and train the splat

This example uses John himself in the captured shot to calibrate the cameras. No calibration bar is required in the images. Calibration estimates the camera positions from features shared between the photos; the person and surrounding scene should be still, sharp, and visible from neighboring cameras.

  1. In Library, select the seven-image dataset and open Calibrate and stabilize.
  2. In Calibration settings, choose Arc for this camera arrangement and select an available calibration method. Start Camera calibration for the selected dataset.
  3. Inspect the recovered camera positions and point cloud. Check that all seven cameras are present, their order matches the physical arrangement, and John is not scattered or duplicated.
  4. In Calibration > Calibration recipes, select the successful calibration as the current recipe for later captures. Keep the source dataset.
  5. Return to the dataset's Splat tab and open Train Gaussian Splat. Choose a processor and review its settings.
  6. Under Calibration recipe, choose Use this dataset's calibration recipe, or Use current calibration recipe if the selected project recipe is the one you just checked. Click Train and wait for the model to finish.
  7. Open the trained result in the Splat Player and inspect it from the available camera angles.

The saved training record for this example used the local Spirula processor, 5,000 iterations, and a maximum image size of 1,920 pixels. The screenshots show Xangle Cloud selected in the player at a later point; processor choice and training settings should be checked for your installation. Cloud training requires Cloud Credits. You do not need to create a stabilized video before training a splat.

For more detail, see Camera calibration, Calibration recipes, and Gaussian splat training.

3. Start with the bounce preset

  1. Above the player, open Preset and find the shipped arc | bounce preset.
  2. Use its Duplicate icon so the original remains available.
  3. Open the player's Settings tab and enter The Photo Bus - splat preset 01 as the Preset name.
  4. If necessary, use Copy to to place the preset at Project scope for the event project, or App scope for use across projects on this installation. Check Active in Automations.
  5. Open Playback and set Duration to 9 seconds. The example uses 24 fps, giving a 216-frame timeline, and a 3:2, 1,920-pixel long-edge video profile.
  6. Play the move and adjust the Motion keyframes in Timeline. Click a diamond to open Keyframe properties, then choose its Anchor and adjust the camera offsets. Use the Anchors panel to inspect the original cameras and calculated first, middle, and last views.

The Anchors panel and a Motion keyframe anchored to Camera 3.

The saved version has eight Motion keyframes. Its main guide points are approximately:

Timeline position Anchor and adjustment
0% Calculated First, Dolly -314%
10.48% Calculated First, Dolly 39%, Crane -14%, Roll -13°
21.58% Calculated First
39.53% and 41.86% Original Camera 3
47.58% Calculated Last
92.01% Calculated First
100% Calculated First, Dolly -314%, Orbit position 360°

The setup also uses a global Dolly offset of -6%. Animated Focal moves from 100 at about 39.5% to 142.5 at 41.86%, then returns to 100 at the end. Animated Crane moves from 0 to -3 at the same Camera 3 moment and returns to 0 at the end. These changes add a brief reframing as the move passes John.

To animate a property, enable its activity icon, find the resulting track in Timeline, and add or select keyframes to set their positions and values. The timeline interpolates between them. The percentages describe positions within the nine-second preset, not separate clips.

See Presets, Playback, and Timeline for the player controls and keyframe editing.

4. Add the spherical reveal

The reveal uses one sphere to show the regular splat inside the boundary and the filament and ray versions outside it. As the sphere grows, the normal scene replaces the stylized strands.

  1. Open Crop, choose Add crop, and add a Sphere. Rename it sphere-reveal.
  2. In Settings, choose Calibrated rig axes for Crop orientation.
  3. Under Apply to layers, set Splat to Normal. Once you create the layers in the next sections, set filaments and rays to Inverted, outside blur to Normal, and dancing-particles to Off. This choice is per layer, not a single switch for the whole scene.
  4. Center the sphere on the subject and use the crop overlay while positioning it. Hide the guide afterward; hiding the guide does not disable the crop.
  5. Enable the activity icon beside Radius. On the Radius track, set these approximate keyframes:
Timeline position Radius
0% 5.31
9.67% 6.38
21.31% 28.22
26.83% 100
87.08% 100
93.98% 0

At 100 the normal targets are fully revealed; returning to 0 at the end reverses the transition. Scrub from beginning to end and adjust the sphere if it cuts through John at an unwanted moment.

The sphere-reveal crop, its layer targets, and its Radius track in the timeline.

The screenshot also shows an Offset track under the sphere. The saved project contains that track, but the current Offset control applies to a wall crop, so do not assume it moves the sphere. Use the sphere's Position and Radius controls for the reveal, and check any older preset after opening it in the current player.

See Crop for crop shapes, layer targets, and animated reveals.

5. Create the filament layer

The filament layer is a duplicate of the current capture, not a separate fixed copy of John's model. That distinction lets the effect follow a new guest's splat when the preset is reused.

  1. Open Layers, expand Splat, and choose Duplicate from its menu. Rename the copy filaments.
  2. In the copy's Settings, set Rendering to Filaments. The example uses Opacity 1.00, Splat size 1.00, Thinness 1.00, Size compression 0, and Keep points 92%.
  3. In Color, the saved layer uses Brightness 3, Contrast 1.1, Saturation 1, and Gamma 0.25. Filaments also have a built-in brightness and gamma boost, so refine these values while watching the preview rather than assuming they will suit every scene.
  4. In Shape, set Ripple to approximately 0.67, Origin X to -1.04, and Ring width to 0.29. Leave Ripple Motion on Manual and animate Ring radius:
Timeline position Ring radius
0% 0
14.62% 4
21.31% 1.55
84.19% 1.55
89.30% 0
  1. Return to Crop > sphere-reveal and confirm filaments is Inverted. Preview the transition with the regular Splat layer visible.

Filaments rendered from a duplicate splat layer.

6. Add dancing particles

  1. Duplicate the main Splat again and rename the new layer dancing-particles.
  2. In Settings, choose Points. The example uses Point size 13.9, Size compression 0, Faint detail lift 1.00, and Keep points 21%.
  3. In Color, enable Colorize and use a warm brown-orange, #b15739, with Colorize amount 1. The saved brightness is 1.15.
  4. In Shape, enable animation for Noise and Grid snap. The saved layer also has a small position offset, so adjust its Position while checking that particles surround the subject rather than cover the face.
  5. Animate Opacity in Settings so the particles fade in and out:
Property Timeline position and value
Opacity 21.20%: 0; 23.27%: 0.67; 90.42%: 0.67; 92.12%: 0
Grid snap 9.78%: 0; 91.75%: 0.82; 93.49%: 0
Noise 7.60%: 3.25; 92.56%: 9.05; 94.88%: 3.25

The changing Noise and Grid snap values deform the particle positions over the move. Keep dancing-particles set to Off in the sphere's layer targets so the sphere does not clip this layer.

The dancing-particles layer and its animated tracks.

7. Add and animate the logo

  1. In Layers, choose Import and select a transparent PNG of the logo. This example includes The Photo Bus logo.
  2. Expand the image layer. Use Position to place it behind or beside the subject, then adjust X, Y, Z, rotation, and scale while scrubbing the camera move. The screenshot shows Calibrated rig axes and an example position of X 8.9, Y -48.8, Z 20.1. The saved preset has a slightly different position; placement is scene-dependent.
  3. Put the image in the intended layer order and inspect it from all angles. Image layers separate splat compositing groups, so ordering can change whether another layer covers the logo.
  4. Enable animation for Opacity, Scale, and Rotation X on the active logo layer. The saved animation uses:
Property Timeline position and value
Opacity 42.28%: 0; 46.42%: 1; 72.21%: 1; 74.34%: 0
Scale 42.28%: 46.3; 46.58%: 24.8; 71.95%: 20.4; 74.34%: 100
Rotation X 72.00%: -180°; 74.55%: 1°

The logo appears during the middle of the move, changes scale, and rotates away as it fades. The saved project also contains a second, hidden logo layer; it is not required for the visible result.

The Photo Bus logo layer, its position, and its animated opacity, scale, and rotation tracks.

Additional layers and cleanup in the saved preset

The reveal, filaments, particles, and logo are the main ingredients, but the saved setup has a few more components worth checking:

  • Rays: another main-splat duplicate, set to Rays, adds faint streaks outside the reveal sphere. The saved values include Opacity 0.03, Width 5.8, Length 13.66, and Keep points 92%. Its Ripple radius, origin, and brightness are animated. Set its sphere target to Inverted and adjust it until it supports rather than overwhelms the filaments.
  • Outside blur: despite the layer's name, its saved Blur value is 0. It is a duplicate rendered as Splats, with Brightness 1.45, Contrast 1.6, and Saturation 0. The sphere targets it as Normal.
  • Additional crops: the project also contains a camera-following wall named floaters-front and a cylinder named desat-scene. The wall targets Splat and outside blur normally. The cylinder targets Splat normally and outside blur inversely, giving the subject and surrounding scene different treatments. Their position and scale depend on the trained scene; inspect them with their guides visible before adapting them.
  • Guides: camera markers and crop overlays help with setup. Leave Bake in render for camera markers and Bake overlays in render for crop guides off unless you want those guides in the video.

Preset edits save automatically after editing settles. Opening the preset list or changing presets flushes pending edits. The preset stores the camera move, crops, layers, animation, and output settings, but check that imported logo assets are available wherever the preset will be rendered. Exporting a preset JSON does not itself include the source media.

See Layers for rendering styles, imported images, layer order, and shape controls.

8. Render an MP4 for review

  1. Select the intended dataset and The Photo Bus - splat preset 01.
  2. Play the whole move and inspect the first and last frames, the sphere transition, the face, hands, particles, and logo.
  3. Open Render. Check the Video preset and output summary: this example uses MP4, 3:2, a 1,920-pixel long edge, 24 fps, and a 9-second move.
  4. Choose Playable and/or Shareable if the result should be registered for those uses, then click Render MP4.
  5. Play the rendered file, not just the preview. Check framing, transitions, output quality, and whether the logo and other assets are present.

The supplied folder includes a 3:2 MP4, a vertical 9:16 MP4, and a 3:2 version with sound effects. These are separate examples; check the selected output profile and audio treatment for your own delivery.

See Render for output profiles, MP4 registration, and export options.

9. Automate the next captures

Once the manual test is approved, configure the Splat process task for new datasets:

  1. On the Camera Server dashboard, open Process and automation, enable the Splat task, and open Automation.
  2. Check the processor and calibration recipe. Use the current project calibration only while it matches the physical camera positions.
  3. Enable Auto-run on new datasets. Choose Slow for the Execution lane so immediate Fast-lane work has priority.
  4. Set Minimum rating deliberately. For example, a three-star minimum processes captures rated three stars or higher; rate the accepted shot in Quickview or Library dataset detail.
  5. Under Sequence preset, choose Use a specific preset and select The Photo Bus - splat preset 01. If it is missing, check its save scope and Active in Automations setting.
  6. Enable Create final video. A trained PLY alone is not the finished MP4.
  7. Capture and rate a new test shot. Confirm that it qualifies, the Splat task runs, and the final MP4 uses the intended preset and includes the logo. Check framing, crops, and effects on the new subject before relying on the setup for guests.

The preset selected in the player is not automatically the automation selection. Local Slow-lane work runs at most one task at a time per host, so test the queue and turnaround for your chosen processor. Xangle Cloud or an Orbit LAN render farm can move processing off the booth computer; availability, capacity, and Cloud Credits depend on the chosen setup.

Keep the cameras, focal settings, and marked guest position consistent. If a camera moves, is re-aimed, or its optics change, recalibrate with a suitable new shot, select the updated recipe, and run another end-to-end test. Check that the selected preset and imported assets also work on any rendering computer.

For processing options and guest delivery, see Processing farm and Run a Gaussian splat photobooth with delayed email delivery.

10. Bonus: the seven-camera bullet-time playback

The same seven photographs can produce the familiar bullet-time video without training a Gaussian splat. Camera Server aligns the captured views and plays them in sequence, optionally bouncing back through the cameras and repeating the move.

Seven-camera stabilized bullet-time playback.

  1. Select the matching calibration recipe in Calibration.
  2. Open Calibration > Stabilization and configure the output Resolution and Playback speed, bounce and repeat. For an Arc layout, Auto can choose a bounce.
  3. Enable the desired stabilization automation and choose whether the output should be Playable or Shareable.
  4. Process a test capture and review the resulting MP4 for stable framing, correct camera order, exposure, and timing.

The saved dataset records a seven-view stabilized example at 3:2, 1,920 pixels, and 24 fps, with four repeats per camera frame and two passes through the video. Those are settings for this example, not a required recipe. Unlike the splat render, this playback uses the captured views and their alignment rather than a virtual camera moving through a trained scene.

See Output and playback for stabilization and bounce settings, and Automation and session checks for automatic processing.

Powered by Beeboo, the agentic website builder, from the Xangle team.